Fujitsu D2759 Manual técnico - Página 34
Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D2759. Fujitsu D2759 38 páginas. For primergy tx150 s7
Imprimir página
Connectors and indicators
LAN connectors
The system board is equipped with a Gigabit Ethernet Controller of the type
Intel 82574L. The LAN controller supports transmission rates of 10 Mbit/s, 100
Mbit/s and 1 Gbit/s.
The LAN controller also supports WOL functionality by means of Magic
Packet™. It is also possible to start a system via a LAN without a separate boot
hard disk drive. PXE is supported here.
The separate service LAN connector is used as a management interface (iRMC
S2) and is prepared for operation with the Remote Management. Optionally
LAN connector 1 can also be used for iRMC S2 server management.
Each LAN connector has two LEDs which display the speed of the connection
and its status:
Figure 8: LAN LEDs
No Indicator
1
LAN
link/transfer
(service LAN)
2
LAN speed
(service LAN)
3
LAN
link/transfer
(system LAN)
34
Description
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Technical Manual
Features
D2759 (TX150 S7)