Fujitsu D2759 Manual técnico - Página 37

Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D2759. Fujitsu D2759 38 páginas. For primergy tx150 s7

Replacing the lithium battery

In order to save the system information permanently, a lithium battery is

installed to provide the CMOS-memory with a current. When the charge is too

low or the battery is empty, a corresponding error message is provided. The

lithium battery must then be replaced.

The lithium battery must be replaced with an identical battery or a

battery type recommended by the manufacturer (CR2450). This

information doesn't apply to the Japanese market.

Do not throw lithium batteries into the trash can. It must be disposed of

in accordance with local regulations concerning special waste.

Make sure that you insert the battery the right way round. The plus pole

must be on the top!

Figure 10: Replacing the lithium battery

Ê Press the locking spring into direction of the arrow (1), so that the lithium

battery jumps out of its socket.

Ê Remove the battery (2).

Ê Insert a new lithium battery of the same type into the socket (3) and (4).

D2759 (TX150 S7)

Technical Manual