Fujitsu D2836 Breve descrição - Página 17

Procurar online ou descarregar pdf Breve descrição para Placa-mãe Fujitsu D2836. Fujitsu D2836 20 páginas. Mainboard

Procedure

The processor socket is covered with a protective cap to protect the spring

contacts. In the event of a warranty claim, the mainboard can only be taken back

by Fujitsu Technology Solutions with the protective cap secured!

Please note that, depending on the heat sink used, different heat sink

mounts are required on the mainboard.

► Depending on the conﬁguration variant, you must pull a protective foil off the heat sink

or coat the heat sink with heat conducting paste before ﬁtting it.

► Secure the heat sink - depending on the model - with four screws or push it into the mounts.

A26361-D2831-Z212-1-8N19, edition 1

Brief description of mainboard

► Remove the heat sink.

► Press down the lever and unhook it.

► Fold up the frame.

► Hold the processor between your thumb

and index ﬁnger and insert it into the socket

(b) so that the marking of the processor is

aligned with the marking on the socket (a).

► Press the lever downward until it is

hooked in again.

► Remove the protective cap and keep it.

English - 3