Fujitsu D2952 Manual técnico - Página 25

Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D2952. Fujitsu D2952 38 páginas. For bx924 s2

3.2.3.2

Performance Channel Mode

In this mode, the maximum performance and capacity can be achieved.
All three channels of a CPU must be populated identically as regards the
size and organization of the memory modules.
The slots within a channel of CPU 1 do not have to be populated identically,
but the corresponding slots of all three channels of CPU 1 must be populated
identically.
Memory modules with different clock frequencies and different speed ratings
can be used within a channel, whereby the settings of the slowest memory
module are used for this channel.
V
CAUTION!
The empty DIMM slots of CPU 1 must be fitted with dummy DIMM
modules to ensure sufficient cooling of the system. In addition always an
air duct has to be mounted to cover the DIMM modules and the dummy
DIMM modules of CPU1.
3.2.3.3

Mirrored Channel Mode

In this mode, channels A and B of CPU 1 and channels D and E of CPU 2 form
exact copies of each other.
Channel A and channel B of CPU1 must be fitted identically and channel D
and channel E of CPU2 must be fitted identically (channel C and F cannot
be used in Mirrored Channel Mode since the "counterpart" is missing).
The slots within a channel do not need to be equipped identically. However,
the corresponding slots in channels A and B must be equipped identically.
Memory modules with different clock frequencies and different speed ratings
can be used within a channel, whereby the settings of the slowest memory
module are used for the channel.
In Mirrored Channel Mode, the total main memory available in the system is
half as large as the installed memory.
V
CAUTION!
The empty DIMM slots of CPU 1 must be fitted with dummy DIMM
modules to ensure sufficient cooling of the system. In addition always an
air duct has to be mounted to cover the DIMM modules and the dummy
DIMM modules of CPU1.
D2952 (BX924 S2)
Technical Manual
Main memory
25