Fujitsu D3012 Breve descrição - Página 29

Procurar online ou descarregar pdf Breve descrição para Placa-mãe Fujitsu D3012. Fujitsu D3012 31 páginas.

Imprimir página

PCI bus interrupts - Selecting correct PCI slot

PCI bus interrupts - Selecting

correct PCI slot

Extensive information on this section is contained in the manual "Basic information on mainboard".

To achieve optimum stability, performance and compatibility, avoid the multiple use

of ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable,

then all involved devices and their drivers must support IRQ sharing.

Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically

speciﬁed by the BIOS (see "BIOS Setup" description).

Monofunctional expansion cards

PCI/PCI Express expansion cards require a maximum of one interrupt, which is called the PCI

interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot.

Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge

These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D. How many

and which of these interrupts are used is speciﬁed in the documentation provided with the card.

The assignment of the PCI interrupts to the IRQ Lines is shown in the following table:

On board controller

PCI INT LINE

UHCI USB 1.1

Dev 1A Fn 0

Dev 1A Fn 1

Dev 1D Fn 0

Dev 1D Fn 1

Dev 1A Fn 2

Dev 1D Fn 2

EHCI USB 2.0

Dev 1A Fn 7

Dev 1D Fn 7

SATA #1

SATA #2

SMBus

Intel LAN

HD Audio

Onboard Graphik

Fujitsu Technology Solutions

1 (A)

2 (B)

1th

2nd

3rd

4th

5th

6th

3 (C)

4 (D)

5 (E)

6 (F)

7 (G)

English - 7

8 (H)