Fujitsu D3433-S1 Breve descrição - Página 24
Procurar online ou descarregar pdf Breve descrição para Placa-mãe Fujitsu D3433-S1. Fujitsu D3433-S1 26 páginas.
![Fujitsu D3433-S1 Breve descrição](/uploads/products/server2/2464676/2464676.jpg)
6 - English
Procedure
The processor socket is covered with a protective cap to protect the spring
contacts In the event of a warranty case, the mainboard can only be taken back
by Fujitsu Technology Solutions with the protective cap secured!
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
► Secure the heat sink - depending on the model - with four screws or push it into the mounts.
20
► Remove the heat sink.
► Press down the lever and unhook it.
► Fold up the frame.
► Remove the protective cap and keep it.
► Hold the processor between your thumb
and index finger and insert it into the socket
(b) so that the marking of the processor is
aligned with the marking on the socket (a).
a
► Press the lever downward until it is
hooked in again.
b
Installing/removing the processor
Fujitsu