Fujitsu SK-8FX-TSC-32PMC Manual do utilizador - Página 19

Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Fujitsu SK-8FX-TSC-32PMC. Fujitsu SK-8FX-TSC-32PMC 28 páginas.

By default, the TSC ID is set to 0x68, and the TSC is operating from its internal 2.5V

Regulator (LDO) and internal oscillator.

The (optional) tuning capacitor C14 is not mounted by default. In case of touch applications

with very high offset capacitance, a small (some few pF) can be mounted here to

compensate the offset capacitance of the touch input pins. Please refer to the 'basic tuning

process' chapter later in this document for details about the tuning capacitor.

Please refer to the TSC documentation (on CD) for details about TSC operation and

configuration.

3.7 TSC User LEDs (JP: 11, 12, 13, 14)

Four LEDs are connected to the TSC's GPIO pins. The TSC can control the LEDs by

switching or PWM dimming.

Jumper

Setting

JP11

(LD11)

JP12

(LD12)

JP13

(LD13)

JP14

(LD14)

SK-8FX-TSC-32PMC User Guide

Chapter 3 Jumpers and Switches

Description

Closed

LD11 is connected to TSC GPIO0 (TSC Pin 22)

Open

LD11 is not connected

Closed

LD12 is connected to TSC GPIO1 (TSC Pin 1)

Open

LD12 is not connected

Closed

LD13 is connected to TSC GPIO2 (TSC Pin 4)

Open

LD13 is not connected

Closed

LD14 is connected to TSC GPIO3 (TSC Pin 8)

Open

LD14 is not connected

Table 3-8: TSC User LEDs

- 19 -

FMEMCU-UG-90003-10