Fujitsu SK-96320-80PMC Manual do utilizador - Página 14
Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Fujitsu SK-96320-80PMC. Fujitsu SK-96320-80PMC 34 páginas.
Também para Fujitsu SK-96320-80PMC: Manual do utilizador (34 páginas), Manual do utilizador (34 páginas)
Imprimir página
3.3 Analog Power Supply Voltage (JP: 11, 13, 15)
The power supply as well as the positive reference voltage for the A/D-converter can be
provided internally or externally.
JP11, JP15 connects analog power supply voltages (AVcc and AVss)
JP13
connects the analog reference voltage AVRH to AVcc
Jumper
JP11 (AVcc)
JP13 (AVRH)
JP15 (AVss)
*1
By default the resistors R11 and R23 are not mounted on the board
Default: JP11, JP13 and JP15 are closed
By default, the A/D-converter supply and reference voltage is same as the microcontroller
supply voltage.
Note:
If JP11 and JP15 are open, the user has to supply an adequate analog voltage supply (AVcc
and AVss) to the A/D-converter.
If JP13 is open, the resistors R11 and R23 define AVRH.
By default the resistors R11 and R23 are not mounted on the board.
FMEMCU-UG-960010-12
SK-96320-80PMC User Guide
Chapter 3 Jumpers and Switches
Setting
Description
Closed
AVcc is connected to Vcc
Open
AVcc is disconnected from Vcc
Closed
AVRH is connected to AVcc
Open
AVRH defined by resistor network
Closed
AVss is connected to GND
Open
AVss is disconnected from GND
- 14 -
© Fujitsu Microelectronics Europe GmbH
*1