Fujitsu SK-96650_6A0_380-120PMC Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Fujitsu SK-96650_6A0_380-120PMC. Fujitsu SK-96650_6A0_380-120PMC 39 páginas. F²mc-16fx family mb96650/6a0/6c0/380 series
Imprimir página
Change odd page title here
Chapter 1 Overview
1.3.8 I2C Bus
Additional 10 kOhm pull-up resistors can be connected to the I²C bus lines by setting the
according jumpers. JP9 is for SDA0 and JP10 for SCL0.
1.3.9 Emulator System
If the board is used as an emulator target board for the MB96300 super series, the
microcontroller must be removed from the socket and the corresponding probe cable has to
be mounted:
Series
V-Chip
Probe cable
Socket
MB2198-16FX-120P-M21
MB96380
MB96V300B
NQPACK120SD, HQPACK120SD
Table 1-1: Emulation System
1.3.10 On-Chip Debug System (OCDS)
If the On-Chip debugging on the MB96600 microcontroller is applied, then the embedded
emulator MB2100-01-E must be connected to the target board via SMA jack on the PCB.
© Fujitsu Semiconductor Europe GmbH
- 9 -
FMEMCU-UG-960031-13