Indesit TAN 6 L FNF Series Manual de Instruções - Página 9

Procurar online ou descarregar pdf Manual de Instruções para Frigorífico Indesit TAN 6 L FNF Series. Indesit TAN 6 L FNF Series 12 páginas. 2-door fridge
Também para Indesit TAN 6 L FNF Series: Manual de Instruções (12 páginas)

Imprimir página

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on the

bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it ( see Assistance ). Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these safety

measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions ( see Installation ).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal light

illuminates ( the FREEZER OPERATION knob must not be on the

position

) .

2. Turn the FREEZER OPERATION knob and REFRIGERATOR

OPERATION knob to an average value. After a few hours you

will be able to put food in the refrigerator.

Using the refrigerator to its full potential

fridge

The temperature inside the refrigerator compartment automatically

adjusts itself according to the position of the thermostat knob.

min = warmest

max = coldest

It is recognisable by aeration cells located on the back walls of the

compartments.

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system maintains

an optimal humidity level in the compartment, preserving the

original quality of the food, preventing the food from sticking

together and making defrosting a thing of the past.

• Do not block the aeration cells by placing food or containers in

direct contact with the refrigerating back panel.

• Close bottles and wrap food tightly.

• Place only cold or lukewarm foods in the compartment, not hot

foods ( see Precautions and tips ).

• Remember that cooked foods do not last longer than raw foods.

: with or without grill.

SHELVES

Due to the special guides the shelves are removable and the height

is adjustable ( see diagram ), allowing easy storage of large

containers and food. Height can be adjusted without complete

removal of the shelf.

Lift shelf

The lift shelf is a special shelf which optimises the space inside the

refrigerator compartment. It may be placed in either of the two

positions shown in the diagram. The most appropriate operating

configuration may be achieved easily, thanks to special guide rails

which offer balanced upward or downward movement.

Varies by number and/or position, Available only on certain

models.