Indesit DFO 3T133 A F X Manual rápido

Procurar online ou descarregar pdf Manual rápido para Máquina de lavar loiça Indesit DFO 3T133 A F X. Indesit DFO 3T133 A F X 33 páginas.
Também para Indesit DFO 3T133 A F X: Manual rápido (37 páginas)

Imprimir página

Quick Guide

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety Instruction.

CONTROL PANEL

1. On-Off / Reset button with

indicator light

2. Program selection button with

indicator light

3. Multizone button with indicator

light / Tablet (Tab)

4. Eco program indicator light

5. Display

6. Program number and remaining

time indicator

FIRST TIME USE

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine's functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

filled when the SALT REFILL indicator light

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the first time you do this: fill the salt reservoir

with water.

3. Position the funnel (see figure) and fill the salt reservoir

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser A should be filled when the RINSE

AID REFILL indicator light

panel is lit.

NEVER pour the rinse aid directly into the appliance

tub.

PROGRAMS TABLE

Program

Eco 50°- Program is suitable to clean normally soiled tableware, that for

this use, it is the most efficient programme in terms of its combined ener-

gy and water consumption, and that it is used to assess compliance with

the EU Ecodesign legislation.

Auto Intensive 65°- Automatic program for heavily soiled dishes and

pans (not to be used for delicate items).

Auto Mixed 55° - Automatic program for normally soiled pans and dishes.

Glass 45° - Program for delicate items, which are more sensitive to high

temperatures, for example glasses and cups.

Fast&Clean 28' 45° - Program to be used for half load of lightly-soiled

dishes with no dried food residues. Without drying.

Extra Hygiene 65° - Normally or heavily soiled crockery, with additional an-

tibacterial wash. Can be used to perform maintenance of the dishwasher.

Extra 50° - Program that allows to wash very big items loaded in the

lower rack. Please apply detergent directly to tub instead of detergent

dispenser. Upper rack should be removed with this cycle.

Prewash - Use to refresh crockery planned to be washed later. No deter-

gent to be used with this program.

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning

performance in a short time without the need to pre-treat dishes.

7. Tablet (Tab) indicator light

8. Closed water tap indicator light

9. Rinse Aid refill indicator light

10. Salt refill indicator light

11. Push&GO button with

indicator light

12. Delay button with indicator light

13. Start/Pause button with

indicator light / Drain out

in the control panel is lit.

in the control

Programs description

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser D only. Place the amount of detergent for

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning effi-

ciency. This system regenerates itself with salt, therefore it is required

to refill salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in final rinse and finishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

Available

options

7 8

Duration

Water

of wash

consumption

program

(litres/cycle)

(kWh/cycle)

(h:min)

**)

3:10

9.5

2:00 - 3:10

14.0 - 17.0

1:30 - 2:30

14.5 - 16.0