A-Neu Video ANI-605XPLBDT Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Extensor A-Neu Video ANI-605XPLBDT. A-Neu Video ANI-605XPLBDT 8 páginas. Transmitter & receiver, hdmi to cat5e/6/7 extender

Imprimir página
A
NEUVIDEO
Transmitter Front & BACK Panels
e
q w
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of the device requires a
q
power supply when both the Transmitter and Receiver are using the PoC function.
LINK LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side. When the data
w
transmission occurs with errors, the LED will blink.
POWER LED:
This LED will illuminate when the devices are connected with a power supply.
e
CAT5e/6 OUT:
Connects to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
r
RS-232 IN:
Plug the 3.5mm D-Sub 9-pin female cable, included in the package, and connect to a PC or laptop for RS-232 command
t
transmission.
IR2 EXTENDER:
Connects to the supplied IR Extender cable for IR signal reception. Ensure that the remote being used is within the
y
direct line-of-sight of the IR Extender.
IR1 BLASTER:
Plug the IR Blaster, included in the package, for sending IR signal from the Receiver side.
u
HDMI IN:
Connects to the source equipment such as a DVD/Blu-ray player.
i
Receiver Front & BACK Panels
e
q w
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of the device requires a
q
power supply when both the Transmitter and Receiver are using the PoC function.
LINK LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side. When the data
w
transmission occurs with errors, the LED will blink.
POWER LED:
This LED will illuminate when the devices are connected with a power supply.
e
CAT5e/6 IN:
Connects to the Transmitter unit with a single CAT5e/6/7 cable for transmission of all data signals.
r
RS-232 OUT:
Plug the 3.5mm D-Sub 9-pin male cable, included in the package, and connect to the device that is to be controlled with
t
RS-232 commands.
IR1 EXTENDER:
Connects to the supplied IR Extender cable for IR signal reception. Ensure that the remote being used is within the
y
direct line-of-sight of the IR Extender.
IR2 BLASTER:
Plug the IR Blaster, included in the package, for sending IR signal from the Receiver side.
u
HDMI OUT:
Connects to a HDMI equipped TV/monitor for display of the HDMI input source signal.
i
r
t
r
t
OPERATION CONTROLS & FUNCTIONS
y
u
y
u
3
i
i