Indesit DI 725 C Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Secador Indesit DI 725 C. Indesit DI 725 C 45 páginas.
![Indesit DI 725 C Manual do utilizador](/uploads/products/server2/2509694/2509694.png)
3 Installation
Before the calling the nearest Authorized
Service for the installation of the dryer, ensure
that electrical installation and water drain is
appropriate referring to the user's manual
they are not suitable, contact a qualified
electrician and technician to make necessary
arrangements.
C
NOTE
•
Preparation of the dryer's location
as well as the electrical and waste
water installations is under customer's
responsibility.
A
WARNING!
•
Prior to installation, visually check if the
dryer has any defects on it. If the drier
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
•
Operate your dryer in a well ventilated,
dust-free environment.
•
The gap between the dryer and the
surface should not be reduced by the
materials such as carpet, wood and tape.
•
Do not cover the ventilation grills of the
dryer.
•
There must not be a lockable, sliding or
hinged door that may block the opening
of the loading door in the place where
your dryer is to be installed.
•
Once the dryer is installed, it should stay
at the same place where its connections
have been made. When installing the
dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
•
Place the dryer at least 1 cm away from
the edges of other furniture.
•
Your dryer can be operated at
temperatures between +5°C and +35°C.
If the operating conditions fall outside
of this range, operation of the dryer will
be adversely affected and it can get
damaged.
Dryer / User Manual
•
The rear surface of the tumble dryer shall
be placed against a wall.
B
•
Do not place the dryer on the power
.
If
cable.
3.2 Removing the transportation
safety assembly
A
C
•
Make sure that the discharge hose is tight
after it is connected to the drain in order
to obtain a better water flow since the
machine is not equipped with a pump.
You can cut and shorten the hose to
adjust its length if necessary.
•
The end of the hose should never be
higher than the level of the water outlet
on the machine. Otherwise, the "tank full"
light of your machine will illuminate and
stop the programme.
•
If the dryer is mounted on the washing
machine by means of a bracket, use of
the water drain hose is recommended.
The drain hose should be directed
downwards as shown in the figure.
DANGER!
WARNING!
•
Remove the
transportation
safety assembly
before using the
dryer for the first
time.
•
If the door swing
side of your
appliance can
be modified, see
the reversible
door mounting
instructions.
NOTE
9