AC Tool Supply 3M Full Body Harnesses Instruções para o utilizador - Página 10

Procurar online ou descarregar pdf Instruções para o utilizador para Dispositivo de proteção AC Tool Supply 3M Full Body Harnesses. AC Tool Supply 3M Full Body Harnesses 17 páginas. 3m occupational health and environmental safety fall protection equipment

Imprimir página

MATERIALS

Webbing

All 3M Full Body Harnesses are constructed with 1¾ in (44 mm) polyester webbing.

The Saturn Full Body Harness has a 1¾ in (44 mm) Nomex® and polyester webbing.

The Coated Web Full Body Harness utilizes a 1¾ in (44 mm) polyurethane coated polyester

webbing.

Hardware

All hardware on the Full Body Harness meet the ANSI Z359.1-2007 standard and OSHA 29

CFR 1910.66 and 1926.502 requirements.

ACCESSORIES

3M R-100 Suspension Trauma Strap

The 3M R-100 Suspension Trauma Strap is available for use on all

3M Full Body Harnesses. The R-100 Suspension Trauma Strap

must be choked onto the D-ring slot, located above the primary

connection opening of the D-ring. Do not connect the R-100

Suspension Trauma Strap to the primary D-ring opening. See R-100

Suspension Trauma Strap User Instructions for more information.

3M D-ring Extenders

Part Number 5550

The 5550 D-ring Extender incorporates a snaphook and D-ring. Attach the snaphook end of the

5550 D-ring Extender to the primary dorsal D-ring of the Full Body Harness. The D-ring of the

5550 D-ring Extender becomes the dorsal attachment point of the Full Body Harness.

Part Number 5552

The 5552 D-ring Extender incorporates a soft loop and two D-rings. Pass the soft loop end of the

5552 D-ring Extender through the primary dorsal D-ring of the Full Body Harness. Secure by

passing the two D-rings of the 5552 D-ring Extender through the soft loop. Each D-ring of the

5552 D-ring Extender becomes a dorsal attachment point of the Full Body Harness.

Warning: The additional length of the D-ring extender must be taken into consideration

during the clearance calculation process.

Lanyard Storage keepers

Approved lanyard storage keepers are located on all 3M Full Body Harnesses where the shoulder

strap meets the chest strap. Lanyard storage keepers are approved only for the connection of the

unused lanyard leg to the harness.

Warning: Never attach the unused leg of the lanyard back to the Full Body Harness at

any location other than an approved lanyard storage keeper.

actoolsupply.com

Here

Not Here