AEG ARCTIS Manual de Instruções - Página 32

What to do if ...

Malfunction

Only temperatures above

0 °C can be set, although

the appliance should be

used as a freezing unit.

Only temperatures below

0 °C can be set, although

the appliance should be

used as a cooling unit.

Replacing the light bulb

Warning! Danger of electrical shock! Before replacing the light bulb

switch appliance off and remove the mains plug, or switch off or

disconnect from the electricity supply.

Light bulb specifications: 220-240 V, max. 25 W, socket: E 14

1. To switch the appliance off press

and hold the ON/OFF button for

approximately 2 seconds.

2. Remove mains plug.

3. For replacement of the light bulb

press the cover and remove it like

shown on the illustration.

4. Replace defective light bulb.

5. Place the cover again.

Possible cause

The appliance is in the

operation mode "Cooling".

The appliance is in the

operation mode "Freezing".

Remedy

Selecting the operation

mode "Freezing". For that,

please refer in the "Select

Freezing or Cooling"

chapter.

Select the operation mode

"Cooling". For that, please

refer in the chapter "Select

Freezing or Cooling".

818 22 13-00/2