AEG ARCTIS Manual de Instruções - Página 9

Installation

Reversing the door

The side at which the door opens can be changed from the right side

(as supplied) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appli-

ance must not be connected to the mains. Remove plug from the

mains beforehand.

1. Tilt the appliance slightly towards the

rear and prop it securely.

2. Unscrew the door hinge screws (K)

and remove the hinge pin bracket (1).

3. Open the door a little way and take it

out downwards.

4. Unscrew the upper pin (A) and screw

it into place on the opposite side.

5. Fit the door into the upper pin (A)

and close it.

6. Screw the hinge pin bracket (1)

securely into place on the opposite

side using the screws (K).

7. Unscrew the handle and refit it on

the opposite side.

not used are to be masked with the

plastic plugs removed.

The holes that are

AEG97

AEG98

AEG75