A-Neuvideo HD-44G Manual de instruções - Página 14
Procurar online ou descarregar pdf Manual de instruções para Interruptor A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 páginas. Ethernet (tcp) set up
Também para A-Neuvideo HD-44G: Manual de instruções (20 páginas), Manual de instruções (6 páginas)
Imprimir página
A
NEUVIDEO
1. ANI-101 IR 300M Transmitter
ANI-101
IR Transmitter Set
2. ANI-101C IR 2M Transmitter
IR Transmitter cable 6ft (2M)
ANI-101C
Transmitter Cable
*** When you plug the External IR extender into the switcher, the front panel IR transmitter remains active. ***
PIN CONFIGURATION:
ANI-101 and ANI-101C Transmitter Pin configuration
ANI-101
IR Transmitter Set
IR Transmitter cable 6ft (2M)
ANI-101C
Transmitter Cable
Note: The External IR jack has voltage on the "Ring" portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug).
Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
Device
IR out
CAT6/6a/7
IR in
DC 12V
R oHS /95/E C
From
To
OUTPUT
Receiver
Receiver
Device
IR out
CAT6/6a/7
IR in
DC 12V
R oHS /95/E C
From
To
OUTPUT
Receiver
Receiver
Tip: Signal
Ring
Tip
Ring :VCC
Sleeve: GND
Sleeve
Tip: Signal
Ring
Tip
Ring: NC
Sleeve: GND
Sleeve
Cable (3C)
ANI-101
Maximum Distance ~ 984 feet (300M)
Cable (3C)
IR Tx
ANI-101C
ANI-101C Maximum Distance ~ 6 feet (2M)
Sleeve
Ring
Tip (center)
ANI-101
Maximum Distance ~ 984 feet (300M)
Sleeve
Ring
Tip (center)
ANI-101C Maximum Distance ~ 6 feet (2M)
12
IR EXTENDER
IR Transmitter (ANI-101)
IR Tx
ANI-101
IR Transmitter (ANI-101C)
VCC (Ring)
GND (Sleeve)
Signal (center)
GND (Sleeve)
Signal (center)