AEG 9000 Series Manual do utilizador - Página 20

Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação AEG 9000 Series. AEG 9000 Series 32 páginas.
Também para AEG 9000 Series: Manual do utilizador (48 páginas), Manual do utilizador (8 páginas)

Imprimir página

www.aeg.com

10.3 Deactivating the tank

indicator

The water container indicator is activated

by default. It illuminates at the end of the

drying cycle or during the cycle if the

water reservoir is full. If the draining kit is

installed the water container is drained

automatically and the indicator can be

deactivated.

To deactivate the indicator:

1. Turn the appliance on.

2. Wait approximately 8 seconds.

3. Select 1 of the available

programmes.

11. CARE AND CLEANING

11.1 Cleaning the filter

At the end of each cycle the

symbol comes on the display and you

must clean the filter.

The filter collects the lint

during the drying cycle.

To achieve the best drying

performances clean the filter

regularly , clogged filter lead

to longer cycles and energy

consumption increase.

Use your hand to clean the

filter , and if necessary , a

vacuum cleaner .

CAUTION!

Avoid the use of water to

clean the filter. Instead throw

away lint in the dustbin

( avoid dispersion of plastic

fiber in water ambient).

1. Open the door. Pull the filter up.

4. Touch and hold down Time Dry and

Delay Start buttons at the same

time.

One of 2 configurations is possible:

• the Tank indicator:

2. Push the hook to open the filter.

Filter

3. Gather lint with hand from both

internal parts of the filter.

symbol

appears - the

water container indicator is

permanently activated

symbol

appears - the

water container indicator is

permanently deactivated

is on if the

is off if the