Kohler 20341T-PNE-CP Manual de instruções de instalação - Página 10

Procurar online ou descarregar pdf Manual de instruções de instalação para Produto de canalização Kohler 20341T-PNE-CP. Kohler 20341T-PNE-CP 10 páginas. Pneumatic in-wall tank with frame short height

Imprimir página
TROUBLE SHOOTING PROCEDURES
Symptoms
No water fills in via inlet
valve
Not flushing
Too high or too low water
volume
Water leaking into toilet
pan
Toilet does not flush
Toilet does not flush
properly.
CONTACT & WARRANTY INFORMATION
For warranty information, please visit our website
New Zealand
www.kohler.co.nz
CALL US FOR HELP
NEW ZEALAND
KOHLER NZ LTD
Free Ph:
0
8
0
0
5
Free Fax: 0800 664 488
www.kohler.co.nz
1310920-A02-A
Probable Causes
T
h
e
l n i
t e
v
a
v l
e
s i
c
o l
s
Floating box of inlet valve is blocked by other parts.
Floating box of inlet valve is block by waste.
The air hose and faceplate are wrongly installed.
The actuator and flush vavle not connected.
The floating box of the inlet valve is not properly
adjusted.
The floating box of the inlet valve is blocked by
waste, so the water is leaking from the overflow
pipe.
The flush valve seal is blocked by waste or
damaged.
A. No water supply.
B. The shut off valve is closed.
Filter screen is clogged.
6
4
5
3
7
0 (
8
0
0
K
O
H
L
e
. d
Australia
www.kohler.com.au
AUSTRALIA
KOHLER CO.
E
R
)
F
e r
www.kohler.com.au
-10-
Recommended Action
O
p
e
n
l n i
t e
v
a
v l
. e
Readjust the position of other parts to avoid
contacting the floating box when it is
functioning.
Wash the floating box with clean water.
Reinstall the air hose.
Reinstall the fastener bracket onto the body
of the outlet valve.
.
Readjust the water level to align with the
waterline mark.
Readjust the position of other parts to avoid
contacting the floating box when it is
functioning.
Take out the outlet valve, clean, or replace
the rubber seal.
A. Wait for restoration of water supply.
B. Open the water supply stop.
Clean the water mesh filter.
e
P
: h
1
8
0
0
K
O
H
L
(1 800 564 537)
E
R