A-Neuvideo HD-44G Manual de instruções - Página 15
Procurar online ou descarregar pdf Manual de instruções para Comutador de matriz A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 páginas. Ethernet (tcp) set up
Também para A-Neuvideo HD-44G: Manual de instruções (20 páginas), Manual de instruções (6 páginas)
Imprimir página
EDID FUNCTION SETUP
EDID setup
Step 1. Press the EDID button
Step 2. Press SOURCE #1 or #2 button row
Step 3. Press the ENTER button
Embedded EDID modes
Embedded EDID setup
Press
EDID
>
SOURCE
SOURCE #1 or SOURCE #2
Select Embedded EDID :
Mode 1 : FSS
Mode 2 : H24-3D
Mode 3 : H24-3D-M
Mode 4 : H36-3D
Mode 5 : H36-3D-M
Mode 6 : DVI-D 1280x1024-60Hz
Mode 7 : DVI-D 1920x1200-60Hz
RESET
How to RESET EDID mode
Press
EDID > RECALL > ENTER
LEARNING EDID
Learning EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
EDID FUNCTION
To change the EDID setup
The display will show the currently selected EDID mode
The button will fl ash blue and the display will show the current Embedded EDID
Status.
To set EDID mode. The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
Total 7 EDID Modes
To select Embedded EDID mode or LEARNING mode
Press EDID button : The LCM will show the current EDID status.
>
ENTER
Repeatedly depressing the source 1 button will cycle up thru the options.
Repeatedly depressing the source 2 button will cycle down thru the options.
EDID Return To Factory default
RESET To the FACTORY DEFAULT (1080p-2CH).
Press EDID button : The LCM will show the current EDID status.
Press RECALL button : The LCM will show the RESET EDID.
Press ENTER to confi rm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
Learning EDID from Destination to Source
Press EDID > Switcher will LEARN destination EDID and pass the selected
source.
Press: EDID > DESTINATION #1 > Switcher will LEARN destination #1
EDID and pass the selected source.
13