A-Neuvideo ANI-0108POE Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Extensor A-Neuvideo ANI-0108POE. A-Neuvideo ANI-0108POE 12 páginas. Hdmi poe 1x8 splitter over cat5e/6 extender
Também para A-Neuvideo ANI-0108POE: Manual de instruções (12 páginas)

Imprimir página

NEUVIDEO

EDID Control

Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess

what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible

with the attached device/display. This information is called EDID (Extended Display Information Data). A source device can only accept

and read one EDID from a connected device/display. Likewise, the source can only transmit one resolution to be used by the connected

device/display. The EDID switch allows for EDID learning or for an EDID pre-set to encourage a "handshake" between the display and

source.

ATTENTION: Please confirm that the extender is working normally before modifying the EDID. When you want to modify the EDID,

change the EDID setting to the corresponding number first and then power cycle the Transmitter.

DIP SWITCH EXAMPLE: The BLACK rectangles are used to represent the Dip Switch pegs. In this example all the pegs are

in the DOWN position showing position 0 for 1080p, 2CH Audio setting. Use the examples below to set the Dip Switch position

for manual EDID settings on the unit.

EDID TABLE:

POSITION

EDID DESCRIPTION

1080p, 2CH AUDIO

1080p, DOLBY/DTS 5.1

1080p, HD AUDIO

1080i, 2CH AUDIO

1080i, DOLBY/DTS 5.1

1080i, HD AUDIO

3D, 1080p, 2CH AUDIO

3D, 1080p, DOLBY/DTS 5.1

Manual EDID Learning Mode

When you switch to any number from "0-8", the Transmitter will set a fixed EDID to the source. For a

detailed EDID description, please refer to the EDID table.

Auto EDID Learning Mode

When you switch to "9", the Transmitter will copy the HDMI LOOP output and display EDID to source.

POSITION

EDID DESCRIPTION

3D, 1080p, HD AUDIO

Copy EDID from the Transmitter HDMI loop out

1080p, 2CH AUDIO

1080i, 2CH AUDIO

EDID Description