A-Neuvideo ANI-402R Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Recetor A-Neuvideo ANI-402R. A-Neuvideo ANI-402R 8 páginas. Hdmi/ir/rs-232 twisted pair over single cable transmitter & receiver

Imprimir página
A
NEUVIDEO
Transmitter Introduction
IR:
IR receiver.
q
ON/LINK/IN LED Indicators:
w
ON:
Working status indicator of this device. When the device works fine, the LED will keep blinking. And it will get off when the device
stops work.
LINK:
Twisted Pair Link status indicator. It will keep on when connection is successful.
IN:
When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, the LED will blink.
POWER LED:
LED indicator of power. When connect with power, red LED will keep on.
e
TP OUT:
Single TP cable connects to TP IN port in ANI-402R.
r
HDMI IN:
Connect to HDMI source.
t
IR IN:
Connect with IR receiver, the IR signal received from this port can only send out in ANI-402R.
y
NOTICE: When there is IR receiver connected to this port, the port (1) will be unavailable.
IR OUT:
Connect with IR sender, the sending IR signal are received from ANI-402R.
u
RS-232:
RS-232 connector.
i
5V DC:
Connect with power supply.
o
RECEIVER Introduction
IR:
IR receiver.
q
ON/LINK/IN LED Indicators:
w
ON:
Working status indicator of this device. When the device works fine, the LED will keep blinking. And it will get off when the device
stops work.
LINK:
Twisted Pair Link status indicator. It will keep on when connection is successful.
IN:
When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, the LED will blink.
POWER LED:
LED indicator of power. When connect with power, red LED will keep on.
e
TP IN:
Single TP cable connects to TP OUT port in ANI-402T
r
HDMI OUT:
Connect to HDMI display, HDMI signal output.
t
IR IN:
Connect with IR receiver, the IR signal received from this port can only send out in ANI-402T.
y
NOTICE: When there is IR receiver connected to this port, the port (1) will be unavailable.
IR OUT:
Connect with IR sender, the sending IR signal are received from ANI-402R.
u
RS-232:
RS-232 connector.
i
5V DC:
Connect with power supply.
o
All are green LED.
All are green LED.

Function Description

3