AEG TR939M4OBC Manual do utilizador - Página 25
Procurar online ou descarregar pdf Manual do utilizador para Secador AEG TR939M4OBC. AEG TR939M4OBC 36 páginas.
Imprimir páginaand Anti-arrugas/Rugas buttons at
the same time for approximately 2
seconds.
In case of Wi-Fi network
connected machines a
ProSense bars animation is
performed for a few seconds
to indicate that your
appliance is updating data to
the Cloud.
If instead the mode is
changed with knob rotation
or switching off the machine,
the data synchronization will
be done during the first Wi-Fi
reconnection.
10.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available
programmes.
3. Touch and hold down Silencioso
and Alarm. buttons at the same time.
One of 2 configurations is possible:
• the tanque/depósito indicator:
is on if the symbol
appears - the water container
indicator is permanently activated
• the tanque/depósito indicator:
is off if the symbol
appears - the water container
indicator is permanently
deactivated
10.4 Operating hours counter
This function gives a possibility to display
the total operating time of the appliance
in hours, which is counted from the
moment it is first switched on. The actual
operating time of the cycles is shown
(does not include pauses or delayed start
time).
To visualise this value, proceed as
follows:
1. Switch the appliance on by pressing
the On/Off button.
2. Press and hold the Tiempo/Tempo
sec. and Nivel de Sec. buttons for
some seconds.
3. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. if the operating
time is 1276 hours, the display shows
the text Hr for 2 seconds then 12 for
2 seconds followed by 76. This value
is displayed with a sequence of two
digits at a time: the first two digits
indicate thousands and hundreds,
the second two digits indicate tens
and units.
To exit this mode, either press any
button, turn the selector knob or switch
the appliance off.
10.5 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
working modes will be reset. It will also
remove WiFi network credentials from
the appliance memory and reset
personalized program settings.
To activate this option follow steps
below:
1. Switch the appliance on by pressing
On/Off button.
2. Wait approximately 8 seconds.
3. Press and hold the Silencioso and
Anti-arrugas/Rugas buttons for
some seconds.
4. The appliance will acknowledge the
operation by displaying
If the procedure does not
work (this could be due to
timeout or wrong keys
combination), switch the
appliance off and repeat the
sequence from the
beginning.
ENGLISH
25
.