Kohler K-1013 Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para Banheiras Kohler K-1013. Kohler K-1013 17 páginas. Acrylic bath
Também para Kohler K-1013: Manual de instalação e cuidados (29 páginas), Manual (4 páginas), Manual de instalação e cuidados (25 páginas), Manual de montagem (4 páginas)

1. Prepare the Site

WARNING: Risk of product damage. Do not support the bath by the rim.

NOTICE: Unless otherwise speciﬁed, ﬂoor support under the bath must provide for a minimum of 80

lbs./square foot (390 Kg./square meter) loading.

Make sure the ﬂooring offers adequate support for your bath, and verify that the subﬂoor is ﬂat and

level.

This bath should be installed in a drop-in or raised deck installation. If a deck-mounted faucet and

valving are planned, ensure that adequate space is available for their installation.

When constructing the framing, allow for the thickness of the ﬁnished wall materials.

Construct 2x4 or 2x6 stud framing designed for your particular installation. Frame the ﬂoor, or

construct a frame for a raised deck installation according to the roughing-in information. Ensure that

there is a 1/16" (2 mm) gap between the ﬁnished deck/ﬂoor surface so the bath does not rest on the

rim.

Position the plumbing according to the roughing-in information. Cap the supplies and check for

leaks.

2. Prepare the Bath

Install the drain to the bath according to the drain manufacturer's instructions. Do not connect the

trap at this time.

Position a clean drop cloth or similar material in the bottom of the bath. Be careful not to scratch the

surface of the bath.

Kohler Co.

Position

the rough

plumbing.

Construct 2x4 or

2x6 stud framing

according to the

roughing-in

information.

Provide a 1/16" (2 mm)

gap between the bath rim

and framing.

Frame the floor

according to the

roughing-in information.

Verify that the subfloor

offers adequate support,

and is flat and level.

1014128-2-D