Kohler K-1163 Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Banheiras Kohler K-1163. Kohler K-1163 25 páginas. Drop-in acrylic baths
Também para Kohler K-1163: Manual de instalação e cuidados (29 páginas), Manual de instalação e cuidados (21 páginas), Manual de instalação e cuidados (25 páginas)

Finished

Deck

Material

Bath

7. Complete the Installation

Carefully remove the protective tape from the bath rim.

Cover the framing with water-resistant wall material.

Seal the joints between the bath rim edges and the water-resistant wall material with silicone

sealant. Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Install the faucet trim according to the faucet manufacturer's instructions.

Clean-Up Procedures

CAUTION: Risk of product damage. Do not allow cleaners containing petroleum distillates to remain

in contact with the surface for long periods of time.

CAUTION: Risk of product damage. Do not use abrasive cleaners, as they may scratch and dull the

bath surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Risk of product damage. Do not use metal scrapers, wire brushes, or other metal tools to

remove stains, paint, plaster, or tar. Use turpentine or paint thinner to remove stains, paint, or tar. Use

a powder-type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

Clean and rinse the bath completely with water immediately after applying cleaners. Rinse and dry

any overspray that lands on nearby surfaces.

Kohler Co.

Apply silicone

sealant to the edges

of the water-resistant

deck material and

the finished deck.

Water-Resistant

Deck Material

Framing

1/16" (2 mm)

Gap

Bath

Finished Wall Material

Water-Resistant

Wall Material

Silicone Sealant

Tiling-In Bead

2x4 Studding

Ledger Strip

1023730-2-F