Kohler VOLUTE K-20610T Instruções de instalação - Página 3

Procurar online ou descarregar pdf Instruções de instalação para Banheiras Kohler VOLUTE K-20610T. Kohler VOLUTE K-20610T 5 páginas. Freestanding bath
Também para Kohler VOLUTE K-20610T: Instruções de instalação (5 páginas)

Imprimir página

Kohler VOLUTE K-20610T Instruções de instalação

INSTALL THE FREESTANDING BATH

1. Make sure the floor is as flat as possible when

choosing the position for installing the bathtub

(uneven floor or tiles could affect the overall

installation). Place the cast iron bathtub at a tilt or

place the bottom on top (at least 2-3 people required;

please be careful) and following instructions in the

following figure to adjust the supports. Adjust the

screws so that the bottom of the bathtub is 105mm

from the floor. Use the same method to install other

adjustable supports. (The height adjustment is for

facilitating follow-on installation of the wood base and

it is suitable for flat surfaces.)

105

2. After the supports are adjusted, return the cast iron

bathtub to its normal position with the bottom facing

down as illustrated in the following figure. Shake the

cast iron bathtub to verify whether the four supports

are even. If the bathtub is shakable, it means that the

floor is not sufficiently even. You can use a wrench to

adjust 1 screw with the highest deviation so that the

four supports are placed on the floor.

Install and tighten the bathtub water drain and pull

out the drainage pipe.

1315528-T01-C

Bath

M12

Adjustable Feet

-3-

2-3

105mm

Go Down

Go Up

Tighten