Kohler ESCALE K-23136T-CPS Manual de instruções de instalação - Página 33
Procurar online ou descarregar pdf Manual de instruções de instalação para Casas de banho Kohler ESCALE K-23136T-CPS. Kohler ESCALE K-23136T-CPS 45 páginas.
Imprimir página
Note: 1. Following the steps: 2B. Discharge pipe installation
method before fixating the tank.
2. Ensure that the tank remains level and plumb.
3. Keep the outlet pipe of the water tank upright. Do not
bend it.
注： 1. 水箱固定前排污管安装步骤 2B：排污管安装方法。
2. 水箱保持水平和竖直方向。
3. 保持水箱冲水管的竖直，不要折弯。
Two. Installation of In-Wall Tank on the timber
(K-32790A-PNE)
二 . 在木框架上隐藏水箱的安装 (K-32790A-PNE)
1. Minimum cavity (stud pocket) dimensions for installation of
the In-Wall Tank, 613mm wide, 80mm deep.
1. 水箱安装的木框架空间最小尺寸：80mm 深，613mm 宽。
2. Install the fixation plate onto the tank
2. 水箱支板安装
Fasten the screw with washer to fixate the fixation plate onto
tank.
用螺丝及垫片组合件将水箱支板固定在水箱上。
3. Ensure that the front face of the tank is flush with the front
of the studs, make sure the height of h1 inlet hole and h2
drainage hole match with the dimensions of bowl.
3. 如图首先确保水箱的前面与木框架的前面对齐，根据座便器
的进水口 h1 和排污口高度 h2 确定水箱进水口的高度 h1 和
排污管的高度 h2。
1456149-K2-A
最小
Min(
)80mm
Screw With Washer
螺丝及垫片组合件
Fixation Plate
水箱支板
h1
Finished Floor
完工地面
-26-
Spirit Level
水平尺
Tank
水箱
Outlet Pipe
冲水管
613
Inlet Hole
进水口
h1
h2
Drainage Hole
排污口
Finished
Floor
完工地面