Kohler ESCALE K-24913T-GS Manual de instruções de instalação - Página 22
Procurar online ou descarregar pdf Manual de instruções de instalação para Casas de banho Kohler ESCALE K-24913T-GS. Kohler ESCALE K-24913T-GS 45 páginas.
Imprimir página
Two. Intelligent faceplate reserved access panel
installation, method one: press from front only
Faceplate No.:
二 . 智能面板预留检修口安装方式，仅有前按安装方式
面板编号：
K-23056T
K-24147T-7
Note: K-78041-7 does not provide transformer and air pump
assembly. Need to purchase the model K-28236-NA
separately.
注： K-78041-7 没有变压器及气泵盒组件，需要另购 K-28236-NA。
1. Installing the transformer
1. 变压器安装
Fixate the transformer onto the wall, as illustrated, the
output terminal of transformer (with 2 core female connector)
through the tube (suggestion: tube inner dia. 16~ 20) into
tank. Connect the input terminal of transformer (black) with
power supply 220V/110V AC. Customer can use a PVC pipe
for wiring.
Warning: Don't mistake the input and output
terminals, or it may cause damage to the product.
Insulation measures must be taken at the connection.
Otherwise, short-circuit current may occur and
damage the transformer.
将变压器固定在墙上，按照图所示走线，将变压器输出端（带
2 芯母端子）穿过电工套管（建议内径： 16~ 20）到水箱
内。电工套管如图所示固定后，变压器的高压输入端（黑线）
接 AC220V/110V 交流电。
警告：请勿接错变压器的输入输出端，否则可能损坏。
接线处做好绝缘措施，否则可能存在短路，引起变压器
损坏。
2. Installing the mask
2. 方外罩安装
Remove the cover, install the mask in the block screen of
the tank, and tighten the screws to fixate the mask to the
tank.
Note: Do not remove and discard the mask cover before
installation of the water tank faceplate.
Foreign matters and dusts should be prevented from
entering the water tank during construction.
将遮板取下，将方外罩装在水箱上原遮板的位置，并拧紧螺
丝使方外罩紧固在水箱上。
注： 方外罩遮板，安装水箱面板前请勿移除和废弃。
避免施工过程中异物及灰尘进入水箱。
1456149-K2-A
K-23056TW
K-78041-7
Low-voltage AC
变压器低压输出端
Ceiling
天花板
Transformer Output
Connector (In Tank)
变压器输出接头
（水箱内）
Input AC 220V/110V (Black)
输入
AC220V/110V ( )
-15-
Brushing Pipe
电工套管
黑
Output AC 6V
输出
AC6V
Transformer Assy.
变压器组件
Mask
方外罩
Cover
遮板
Screw
螺丝
Water Tank
水箱