Kohler FAMILY CARE S-TRAP K-23191T-ITNS Manual de instruções de instalação - Página 6

Procurar online ou descarregar pdf Manual de instruções de instalação para Casas de banho Kohler FAMILY CARE S-TRAP K-23191T-ITNS. Kohler FAMILY CARE S-TRAP K-23191T-ITNS 10 páginas. 3.0/4.8l vitreous china two piece toilet

Imprimir página

IMPORTANT:

Before turning on the supply valve for the first

time, follow the steps below to clear sand, debris and rust

from the system:

Make sure water supply is off. Remove valve END by

rotating it 1/8 turn counterclockwise.

While holding a container over the uncapped VALVE to

prevent splashing, turn water supply on and off a few times.

Leave water supply off.

Replace END by engaging lugs and rotating 1/8 turn

clockwise.

Make certain the top is turned to the locked

position. Valve may not turn on if top is not fully in the

locked position.

Turn on water supply. Check that water level is at the marked

water line.

Install the toilet seat according to the

seat manufacturer's installation

instructions.

Connect the push button and flush

valve.

FILL VALVE ADJUSTMENT

Fill float with ballast

Adjust the cam clockwise or counter-

clockwise until the water level is at the

marked water line.

Test flush the toilet.

Check all connections for leakage for

several days.

Set the tank cover in place on the tank.

CONTINUOUS CLEAN

For K-23191T-ITNS/K-23192T-ITNS

1. Install and connect the CONTINUOUS CLEAN.

Refer to the illustration on

the right for the positions

of refill tube, fill valve,

flush valve and bowl

cleaner.

1402301-T01-B

Fig.#17

Fig.#18

(

K-23191T-ITNS/K-23192T-ITNS

Refer to the illustration on

the right for structure of

flush valve.

Fig.#19

-6-

1/8

)

(

)

Place to connect the water refill tube