Kohler COMMAND CV24 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Motor Kohler COMMAND CV24. Kohler COMMAND CV24 25 páginas. Vertical crankshaft engine

5. Reinstall the oil fill cap/dipstick and tighten

securely.

NOTE: To prevent extensive engine wear or

damage, always maintain the proper oil

level in the crankcase. Never operate the

engine with the oil level below the

"ADD" mark or over the "FULL" mark on

the dipstick.

Oil Filter

Figure 8. Oil Drain Plugs and Oil Filter.

Service Oil Cooler

Some engines are equipped with an oil cooler. One

style of oil cooler mounts on the engine crankcase and

has the oil filter on it (see Figure 9). The other style of

oil cooler is mounted on the blower housing (see

Figure 10), separate from the oil filter.

Inspect and clean oil cooler every 100 hours of

operation (more frequently under severe conditions).

Oil cooler must be kept free of debris.

Figure 9. Crankcase Mounted Oil Cooler.

Starter

Oil Drain Plug

To service the crankcase mounted oil cooler, clean off

the outside fins with a brush or with compressed air.

Figure 10. Blower Housing Mounted Oil Cooler.

To service the blower housing mounted style oil

cooler, clean the outside of fins with a brush. See

Figure 10. Remove the two screws holding the cooler

unit to the blower housing. Tilt the cooler downward

as shown in Figure 11. Clean the inside of the cooler

with a brush, as shown in Figure 11, or with

compressed air. After cleaning, reinstall the oil cooler

to the blower housing with the two mounting screws.

Figure 11. Cleaning Blower Housing Mounted Oil

Cooler.

Change Oil Filter

Replace the oil filter at least every other oil change

(every 200 hours of operation). Always use a genuine

Kohler oil filter. Use chart below to determine part

number to order.

Oil Filter Part No.

12 050 01-S

52 050 02-S

Length

2-1/2"

3-3/8"