Kohler Courage XTR-6 Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Motor Kohler Courage XTR-6. Kohler Courage XTR-6 19 páginas. Vertical shaft
Também para Kohler Courage XTR-6: Manual do Proprietário (24 páginas)
Oil Change
Oil can be changed by either draining it from the
dipstick tube, or from the optional drain plug. Change
of operation. Change oil while engine is still warm,
Drain Oil from Dipstick Tube
1.
To keep dirt, grass clippings, etc., out of the
container.
Air Cleaner
Oil Flow Direction
Figure 15. Engine Tilted onto Side, Air Cleaner Up.
engine back upright.
to the FULL
Recheck oil level before adding more oil. Do not
screw dipstick in when checking oil level.
Drain Oil Via Crankcase Plug (If Accessible)
1.
Disable engine by disconnecting spark plug.
drain oil into approved container. See Figure 16.
Figure 16. Crankcase Plug.
NOTE: Oil will drain easier and more quickly if the
3.
Air Cleaner System
This engine is equipped with either a replaceable, high
on the application. In addition, an optional foam
precleaner may also be included. See Figure 17.
Air Cleaner Cover
Up
Figure 17. Air Cleaner Assembly – Exploded View.
Check the air cleaner daily or before starting the
engine for a buildup of dirt and debris. Keep this area
in and around the air cleaner clean. Also check for
loose or damaged components. Replace all bent or
damaged air cleaner components.
NOTE: Operating engine with loose or damaged air
Paper Air Filter
Yearly or every 100 hours of operation replace the
extremely dusty or dirty conditions.
Crankcase Plug
dipstick is removed.
Apply thread sealant around three full threads
of the drain plug, and reinstall the drain plug;
torque to 13.6 N·m (120 in. lb.).
Precleaner (If Equipped)
Air Filter
air into engine, causing premature wear and
failure.
(Kohler part number 14 083 01-S).
and the precleaner, if equipped. See Figure 17.
cleaner base and cover for damage. All air cleaner
questionable air cleaner components.
Air Cleaner
Base
EN
11