Kohler 1.4BEOR-12V Funcionamento - Página 27

Procurar online ou descarregar pdf Funcionamento para Gerador portátil Kohler 1.4BEOR-12V. Kohler 1.4BEOR-12V 44 páginas. Heavy duty truck mobile generator sets

Imprimir página

8. Disconnect the oil pressure switch. See Figure 5-9.

Front View of Unit

1. Oil pressure switch

Figure 5-9 Oil Pressure Switch Location

9. Loosen and remove the two screws and remove

the oil filter cover. Make sure the oil filter cover

gasket is intact and replace if it is damaged. See

Figure 5-10 and Figure 5-11.

Front View of Unit

1. Screw

Figure 5-10 Oil Filter Location

1. Oil filter cover

2. Oil filter

gasket

Figure 5-11 Removing Oil Filter Cover

TP-6687

9/10

tp6576

2. Oil filter cover

tp6576

3. Oil filter cover

Note: DO NOT pollute the environment. Dispose

of used engine oil and other contaminants in

a safe, approved manner.

10. Remove the used oil filter and replace with a new

filter. See Figure 5-12.

1. Oil filter

Figure 5-12 Removing Oil Filter

11. Replace the oil filter cover with its gasket placed

correctly and tighten it using the two screws.

12. Reconnect the oil pressure switch.

13. Using a funnel, pour enough oil into the tank

through the upper opening.

14. Remove the oil dipstick to check the oil level. The

right oil level is close to, but not above, the MAX

mark.

15. After filling with oil, replace the dipstick, insert and

screw on the oil fill cap, and correctly replace the

top and front access panels of the power unit

enclosure, locking them with the supplied plastic

key.

Section 5 General Maintenance

tp6576