Kohler 30RYG Funcionamento - Página 23

Procurar online ou descarregar pdf Funcionamento para Gerador portátil Kohler 30RYG. Kohler 30RYG 36 páginas. Commercial generator sets

Imprimir página

3.3 Maintenance and Service Parts

Figure 3-1 identifies maintenance and service parts for

your generator set.

See Section 4.3 for fuse part

numbers. Obtain a complete list of maintenance and

service

parts

from

distributor/dealer.

Part Description

Maintenance Kit (includes air cleaner

element, belt, and oil filter):

15RYG

30RYG

Air Cleaner Element

Belt

15RYG

30RYG

Oil Filter

Spark Plug

Figure 3-1 Maintenance and Service Parts

3.4 Lubrication System

3.4.1

Oil Specifications

Use oil that displays the American Petroleum Institute

(API) "Starburst" certification mark for gasoline engines

on the container. Using unsuitable oil or neglecting an

oil change may result in engine damage that is not

covered by the engine warranty. Figure 3-2 shows the

recommended Society of Automotive Engineers (SAE)

viscosity designation for a given operating temperature.

Do not mix different oil brands. Incompatibility could

cause a breakdown of lubricating ingredients and

reduce engine protection.

3.4.2

Oil Check

Check the oil level in the crankcase daily or before each

startup to ensure that the level is in the safe range. Do

not check the oil level while operating the unit. Stop the

generator set and keep the generator set level to get an

accurate reading. To check the oil level, remove the

dipstick and wipe the end clean, reinsert and remove.

Maintain the oil level between the Full and Add marks on

the dipstick, as shown in Figure 3-3. See Section 1,

Service Views for the dipstick location.

Note: Do not operate the set if the oil level is below the

Add mark on the dipstick or above the Full mark

on the dipstick.

TP-6197 3/06

your

authorized

generator

Part Number

GM35030-KP1

GM35030-KP2

GM16944

GM28353

GM28352

GM28351

GM35826

3.4.3

Oil Additions

Adding some oil between oil changes is normal. The

amount varies with generator set usage. Open the oil fill

cap and pour in a small amount of oil using a funnel or

other suitable pouring device. See Section 1, Service

Views, for the oil check and oil fill locations.

Ambient Temperature

--18_C (0_F) or above

Below --18_C (0_F)

Figure 3-2 Engine Oil Selection

1. Full mark

2. Add mark

Figure 3-3 Oil Level Check

3.4.4

Oil Change

Change the oil according to the service schedule or

before generator set storage. Change the oil more

frequently if the generator set operates under dirty,

dusty conditions. Change the oil while the engine is still

warm. See Figure 3-4 for oil capacity. See Section 1,

Service Views, for oil fill, oil check, and oil filter locations.

Oil Change Procedure

1. Stop the generator set.

2. To drain the oil, open the oil-drain valve. See

Section 1 for the valve location.

3. Drain the oil into a suitable container.

4. Allow ample time for all oil to drain.

5. Close the oil-drain valve.

6. Remove the oil-fill cap.

7. Replace the engine oil filter according to the

service

schedule

Section 3.4.5.

8. Fill crankcase with oil. Section 1 shows the oil fill

location. See Figure 3-2 for oil selection and

Figure 3-4 for oil capacity. Replace the oil-fill cap.

9. Start the generator set and check for oil leaks.

Section 3 Scheduled Maintenance

SAE Viscosity Grade

10W-30

5W-30

TP-5586-3

and

the

procedure