Kohler 5ERKM Funcionamento - Página 21

Procurar online ou descarregar pdf Funcionamento para Gerador portátil Kohler 5ERKM. Kohler 5ERKM 40 páginas. Commercial mobile generator sets

Imprimir página

Oil Change Procedure

1. Stop the generator set.

2. To drain the oil, open the oil drain valve. See

Section 1 for the oil drain valve location.

3. Drain the oil into an oil collection container.

4. Allow ample time for all of the oil to drain.

5. Close the oil drain valve.

6. Remove the oil fill cap.

7. Fill the engine crankcase with oil. Section 1 shows

the oil fill location. See Figure 3-1 for oil selection

and Figure 3-3 for oil capacity. Replace the oil fill

cap.

8. Start the generator set and check for oil leaks.

9. Stop the generator set. Check the oil level. Add oil,

as necessary, to bring the level up to the Full mark.

Note: Do not pollute the environment. Dispose of

used engine oil and other contaminants in a

safe, approved manner.

TP-6081 4/00

3.4 Fuel System

3.4.1

Fuel Specifications

Use a clean, good quality unleaded fuel with an octane

number of 87. Use fresh gasoline to ensure it is blended

for the season and to reduce the possibility of the

formation of gum deposits that could clog the fuel

system. Do not use gasoline left over from the previous

season.

Kohler Co. recommends unleaded fuel because it

leaves fewer combustion chamber deposits. Never mix

oil with fuel.

Note: Consult

the

engine

oxygenated fuel recommendations.

3.4.2

Carburetor/Choke Lubrication

At the interval specified in the service schedule,

lubricate the carburetor and choke linkage using a light

oil. See Section 1, Service Views for the carburetor and

choke linkage locations.

3.4.3

Carburetor Adjustment

The carburetor is factory-set.

possible.

Section 3 Scheduled Maintenance

owner's

manual

for

No adjustments are