AQC MAXIHYDRO MS-100 Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Coletor de pó AQC MAXIHYDRO MS-100. AQC MAXIHYDRO MS-100 14 páginas.

Wet type dust collector

4 2 SET-UP AND START-UP PROCEDURES FOR WET TYPE DUST

COLLECTOR

4.1

Level the unit

Check to ensure that the unit is level in all directions.

4.2

Check all connections

Check that the gasket between the inlet duct and the transition interface is correctly positioned

between the flanges and that the flanges are tightly bolted.

Connect the inlet and outlet ducting to the unit. Check that the gaskets are correctly positioned

between the duct runs and the unit, and that all unions are tightly bolted.

MS TYPE – STYLE A

The MS Type Style A is a highly efficient dust collector with a low noise level. It can easily be

installed inside a plant or tool room, and heated or cooled air can be discharged back into the shop.

The MS Type Style A comes with a hand rake and sludge bin for sludge disposal.

AIR

INLET

Figure 2

MIST

ELIMINATOR

PLATES

SLUDGE RAKE-

OUT CHUTE

INLET

AUTOMATIC WATER

CONTROL SYSTEM

CONTROL PANEL

ACCESS DOOR