A-TOUCH W-Thermo Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Termostato A-TOUCH W-Thermo. A-TOUCH W-Thermo 15 páginas.

Imprimir página

SWITCHING THE SECOND UNIT ON AND OFF

If the heater or cooler unit selected is LOCAL or REMOTE (operation with just one

unit), it is possible to switch temporarily the mode to BOTH without changing the

COOLER or HEATER unit in the configuration menu.

To switch the REMOTE unit on and off proceed as follows:

22º

21.2º

22º

21.2º

Notes:

The ventilation speed will always be shown, even if the remote unit is not an

air conditioning or an air flow unit: this is because the local unit cannot know

the configuration of the remote unit.

If the remote unit has no ventilation, then changing the ventilation speed

will have no effect.

If the remote unit has ventilation, it will follow the same speed as indicated

on the local unit display.

You can define any type of unit for the local and remote units> any

combination is possible.

INTEGRATION WITH DOMOTICS

The A-TOUCH thermostats can be integrated in a home automation system,

enabling association with scenarios, remote switch on and off, both from a light

switch or your smart-phone APP. For that, the unit has to be connected to the

communication bus of the automation system.

CONTROL FROM AN AUTOMATION UNIT

Any automation unit, for example light switch, can switch the thermostat on and off

if they are associated and the right commands are sent. The commands have the

following function:

TOGGLE

ON/UP

OFF/DOWN

TIMER

DELAY

SCENARIO

Notes:

If unit is totally OFF, TOGGLE will not be able to switch the uit ON, only

AUTO OFF.

If the unit is AUTO OFF, TOGGLE will not be able to switch the unit

completely OFF.

TIMER has no meaning because the maximum time that can be set is 20

minutes, too less for climatization operation

The SCENARIO command is transformed into OFF/DOWN when all members

of the scenario are already on the scenario state. In this case, the

thermostat will switch from ON to AUTO OFF or AUTO OFF to OFF, depending

on the original state. In any case, the climatization is switched on.

[email protected]

Hold the key

(VENT) for more than 1 second:

- the REMOTE unit will switch on, the actual ventilation speed is

shown.

switching between OFF and AUTO OFF or switching between AUTO

OFF and ON.

switch from OFF to AUTO OFF and switch from AUTO OFF to ON.

switch from ON to AUTO OFF and switch from AUTO OFF to OFF.

should not be used

switch from ON to AUTO OFF and switch from AUTO OFF to OFF after

the delay time specified

select directly the mode as defined in the SCENARIO