Dexford WSRC 2256 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Estação meteorológica Dexford WSRC 2256. Dexford WSRC 2256 4 páginas. Weather station with wireless-thermometer and radio clock
Imprimir páginaWSRC 2256
Weather Station with wireless-thermometer
and radio clock
Display icons and operating elements
1 12 hour history of pressure
2 Air pressure data
4 Weather
8 Outdoor low battery
9 Channel
10 RF symbol
11 Temperature alert
12 Outdoor temperature (Press the key "-" to switch between °C or °F)
13 Indoor temperature trend, ➙ ➚ ➘
14 Outdoor humidity trend, ➙ ➚ ➘
15 Living face (Comfortable, dry, humid)
16 Indoor humidity
17 Week
18 Day of Week
19 Alarm
20 Month
21 Time
22 Summer time
23 Date
24 Moon set
25 Moon Rise
26 Moon Phase
27 Cities to determine the rise and set times
28 Sun set
29 Sun rise
30 Outdoor temperature
31 Outdoor humidity
A MODE
B +
C -
ENGLISH
D HISTORY
E CHANNEL
Operating Instructions
F SNOOZE / LIGHT
Please read and observe the following information and keep the
G RESET
operating manual nearby for future reference!
a Change from °C / °F
WARNING!
b Change channel
Safety information
Only use batteries of the same type!
STARTING UP
Always treat batteries with due care and attention and only use
After inserting the batteries, the altitude (2) is flashing , pls use "+", "-"to
batteries as described.
set the altitude of your position, then press "HISTORY", the weather
Never use standard and rechargeable batteries together. Never use
symbol (4) is flashing, pls use "+ ", "-" to choose the weather
rechargeable batteries or standard batteries with different capacities or
The station is now connecting to the outdoor sensor (WRS). This pro-
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
Risk of suffocation through small objects, packaging and protective foil!
press"CHANNEL" (E) for more than 3 seconds to receive again.
Keep children away from the product and its packaging!
The weather station is capable of receiving up to 3 different channels.
Risks to health and the environment from batteries!
Select the channel number (1, 2, or 3) by pressing the "b" switch.
Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
Select the channel number (1, 2, or 3) by pressing the "Channel" button
metals.
(E) on weather station.
The automatic receiving of the DCF radio signal (DCF77, Time signal
frequency 77,5 kHz) begins after 3 minutes of outdoor WRS reception.
ATTENTION!
This DCF reception process is going on,the flashing symbol "radio
Prevent exposure to environmental influences, e.g. smoke, dust,
tower" appears in the time display area at the same time.
vibration, chemicals, moisture, heat and direct sunlight.
Once radio signal receiving is successful, the display shows the symbol
Only allow repairs to be completed by qualified personnel.
"radio tower" continuously. No flashing. One synchronisation per
day is sufficient to keep the time display accuracy at 1 second.
Package contents
Weather station main unit, Thermo-hygro sensor, Operating manual
function „Time Zone". If, e.g. your time is 1 hour ahead of the German
Thermo-hygro sensor (WRS)
time, set the time zone display to +01. The clock is now DCF controlled
Please observe a minimal distance of 2.5m to sources of interference
a
30
The radio signal sender (DCF) coverage up to 1500km distance to
Frankfurt/Main. If, due to bad reception,or no RCC automatic time
31
b
reception is possible, follow the steps below manually.
ATTENTION: Please note all other clock / weather station settings
seize to function when the clock is in RCC synchronization mode.
The most important is to quit the receiption of radio controlled
signal by holding together "+ "and"-" for 3 seconds in case of the
"radio tower"symbol flashing before set-up
MANUAL SET-UP
(The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.)
3 Freeze
Press and hold key "MODE" for 3 seconds.
The display for the year is flashing. Use "+" and "-" to select the year.
5 Bar of air pressure
Press "MODE" to confirm.
6 Air pressure trend, ➙ ➚ ➘
The display for the month is flashing. Use "+" and "-" to select the
7 Indoor low battery
Press "MODE" to confirm.
The display for the date is flashing. Use "+" and "-" to select the date.
Press "MODE" to confirm.
The display for the time zone is flashing. Use "+" and "-" to select the
time zone (-12 to +12).
Press "MODE" to confirm.
The language selection for the display of the weekdays is flashing. Use
"+" and "-" to select the language.
Press "MODE" to confirm.
The 12/24 hour flashing. Use "+" and "-" to select
Press "MODE" to confirm.
The display for the hour is flashing. Use "+" and "-" to select the hour.
Press "MODE" to confirm.
The display for the minutes is flashing. Use "+" and "-" to select the
Press "MODE" to confirm.
The display for country/city is flashing, Use "+" and "-" to select the city
of Sunrise/Sunset and Moonrise /Moonset. (A list can be found at the
end of the manual)
Press "MODE" to confirm
Daily alarm set-up
Press "MODE" to switch from time display to A1 display
Press and hold the key "MODE" for 3 seconds ,the flashing alarm time
are shown. The hour display of the alarm time is flashing. Use "+" und
"-" to select the hour.
Press "MODE" to confirm.
Then follow the minutes. Use "+" und "-" to select the minutes,
Press "MODE" to confirm.
Then press "MODE" to switch from A1 display to A2 display
Daily alarm on/off
When showing A1 alarm time, press "-" to activate the alarm 1 with
Press "-" again cancel the alarm
When showing A2 alarm time, press "-" to activate the alarm 2 with
Press "-" again cancel the alarm
A1 for alarm from Mo. to Fr., A2 for alarm from Sa. to Su.
cess takes about 3 minutes. Then the display shows the outdoor
Snooze function
temperature and humidity. In case of failure of reception, pls
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate
flashing. The alarm repeat after 5 minutes.
The snooze function can be stopped by pressing any key.
The weather station will scan the 3 channels automatically.
Max./ Min. for the indoor/outdoor temperature and humidity
Press "+" for displaying of indoor/outdoor max./min. of temperature and
humidity, hold "+" for more than 3 seconds to clear up the max./min.
Temperature alert set-up
As an example this allows to get a frost damage warning. The main unit will
give an alarm signal when the set temperature limit is reached.
Press "Channel" to select the channel (1, 2, 3)
NOTE: If the clock receives the DCF signal, but your location is in a
Press and hold the key "-" in the area of outdoor (9), select ON/OF
different time zone, the clock can be adjusted manually with the
when flashing.
Press "MODE" , the upper limit temperature is flashing, use "+" , "-" to
but the time is one hour ahead.
set the maximum alert temperature.
Press "MODE ", the lower limit temperature is flashing, use "+" , "-" to
such as televisions or computer screens.
set the minimum alert temperature. When the alert is activated, the alert
symbol (11) will be shown.
The set-up process cannot be completed if the maximum temperature
selected is lower than the minimum selected temperature.
The minimum temperature selected must at least be 1°C below the maxi-
mum selected temperature.
Temperature alert on/off
Press and hold the key "-" to set the temperature alert on or off.
Alert on: Temperature alert symbol (9) shown in display
Alert off: Temperature alert symbol (9) goes out.
Illumination
Press the key "SNOOZE/LIGHT" to activate the display illumination for
5 seconds.
WEATHER FORECAST
Sunny Slightly Sunny
month.
The weather station analyzes the weather patterns from the past 24 hours
to determine the forecast for the next 12 – 24 hours. The weather forecast
is only for reference and domestic use. Accuracy rate might be lower in
extreme conditions.
History for the past 12 hour of air press.
Press the key "HISTORY" to check the past 12 hours (1)
Moon phase display
The weather station uses saved data to determine the moon phases. So it
is not necessary to manually enter data. There are 12 moon phases appear.
minutes..
Country / City list
The same setting as for A1.
alarm symbol showing.
alarm symbol showing.
the snooze function. If the snooze function is activated, alarm symbol is
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
Dexford equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply to the batteries or power packs
used in the products. The period of guarantee is 24 months from the date
of purchase. All deficiencies related to material or manufacturing errors
within the period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tampering by
the purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
Cloudy
Rainy
Storm
storage, improper connection or installation or Acts of God and other
external influences are excluded from the terms of guarantee. In the case
of complaints, we reserve the right to repair defective parts, replace them
or replace the entire device. Replaced parts or devices become our pro-
perty. Rights to compensation in the case of damage are excluded where
there is no evidence of intent or gross negligence by the manufacturer. If
your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the Dexford device,
producing the purchase receipt as evidence. All claims under the terms
of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted
after a period of two years from the date of purchase and hand-over of the
product.
Disposal
In order to dispose of your device, take it to a collection point provided by
your local public waste authorities (e.g. recycling centre). According
to the laws on the disposal of electronic and electrical devices,
owners are obliged to dispose of old electronic and electrical devices
in a separate waste container. The adjacent symbol indicates that
the device must not be disposed of in normal domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free
of charge. The symbols indicate that the batteries must not be
disposed of in normal domestic waste and that they must be brought
to collection points provided by local public waste authorities. Packaging
materials must be disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive 1999/5/EC
on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity. Conformity with the above
mentioned directive is confirmed by the CE mark on the device. To
view the complete Declaration of Conformity, please refer to the
free download available on our web site www.dexford.com.
Technical data (All rights reserved)
Feature
WSRC 2256
W x H x D
Weight
Signal frequency
Power
Temperature range
Humidity range
Thermo-hygro sensor (WRS) max. 30 meters in open area
W x H x D
Weight
Power
Temperature range
Humidity range
Value
169 x 120 x 48 mm
320 g (without battery)
433 MHz
2 x 1,5V AA, not included
-20 ~ +50 °C
20 ~ 95 %
60 x 100 x 25 mm
52 g (without battery)
2 x 1,5V AAA, not included
-20 ~ +60 °C
20 ~ 95 %