Aqua SPOT LED Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Equipamento de iluminação Aqua SPOT LED. Aqua SPOT LED 4 páginas.
Imprimir páginaInstruction Manual for
SPOT LED for nozzle
Description
Spot LED for nozzle of pool, with threaded connection for nozzles 1"1/2 and (with adapter supplied) for
nozzles 2" (inlet)
Available with external diameter of 51 mm.
Available in versions: white, white/blue and RGB (color).
Body in polycarbonate.
3 m long cable + adapter for use in nozzles with 2 " internal thread.
Technical Features
Standard input voltage: 12V (AC/DC for single color, AC only for RGB color)
Use life: 30,000 hours continuous operation
Color: White or White end Blue, or RGB (16 programs with Synchronization capability)
Power factor: 90% (75% for power 10W).
Protection degree: IP68
Cromatic index CRI: 85%
Color Temperatur: 6000°K (white)
Input Watt and lumen: LED SMD2835
WHITE
WHITE/BLUE
RGB
Sequence 16 Programs of RGB LED Bulbs
1.Evening sea: slow animation blue/red; 2.Evening rivers: slow animation green/red;
3.Riviera: slow animation blue/green; 4.White: neutral white; 5.Rainbow: slow animation in
green/blue/green+blue/red+blue/green+blue/RGB/red; 6.River of colors:slow animation in
red/green/blue/green+blue/red+blue/green+blue/RGB, followed by program 8; 7.Disco: fast
animation ,(fast-slow) followed by program5; 8.Four seasons: slow animation in
red+green/green/green+blue/blue/violet/red; 9.Party: fast animation,(fast-slow) followed by program 6;
10. White: sun white 11. Red: fixed color red; 12. Green: fixed color green; 13. Blue: fixed color blue
14. Green-blue: fixed color red/green(gold); 15. Red-green: fixed color green/blue(cyan)
16. Blue-red: fixed color blue-red (violet).
Instruction & Use
This Spot LED for nozzle is designed to be housed in most of the nozzles on the market, both with external
2 " ½ thread (with 2" internal thread) and with 2 "external thread (1" ½ internal thread) thanks to the use
of a special adapter included in the supply.
The light should be positioned on the wall of the pool about 700 mm deep with respect to the surface of the
water, in an area easily accessible for possible maintenance.
• It is highly recommended to use the underwater cable gland
• All lamps should be installed on the same transformer and switch.
• The lamp is supplied with cable of 3m, making it possible to install multiple lamps connected to a single
junction box.
Maintenance & Replacement
There is no maintenance required for this spot LED for nozzle. It is designed to be used only once,
meaning that replacement is necessary if it becomes defective (repairing is impossible).
Before any handling, ensure that there is NO voltage supplied to the lamp.
To replace, unfasten the lamp from the bracket.
Ensure the new lamp is of the same model and characteristics as the one being replaced.
7W – 675 lm
7W – 481 lm
8W – 481 lm