Aqua Computer Aquaduct 360 eco Manual de instruções e de montagem - Página 4

Procurar online ou descarregar pdf Manual de instruções e de montagem para Hardware informático Aqua Computer Aquaduct 360 eco. Aqua Computer Aquaduct 360 eco 20 páginas. Aquaduct eco series

Imprimir página

AQUADUCT ECO

To keep the maintenance frequency of the aquaduct as low as possible,

large water tanks were integrated into the cooling profiles. Through this

the refill of water is minimized to an annual maintenance.

The aquaduct comes with a small circuit board for a free PCI slot. It

supplies the aquaduct with current and offers various connections for PC

communication and additional components.

1.2. Information on the

1.2.

Information on the assembly

Information on the

To enable cooling by water in sensible electronic devices, one basic re-

quirement has to be fulfilled: the entire system has to be completely wa-

tertight and long lasting. This has always been our priority in developing

water cooling equipment. Therefore high-quality plug-connectors are

used for our plug&cool-system. These rather expensive, but by the in-

dustry almost exclusively used push-in connectors possess a pressure

resistance of more than 10 bar, when using suitable hoses, guaranteed

by the manufacturer. This pressure is water cooling systems is far lower

than this value.

In addition to the aquaduct cooling system you merely need the water

coolers matching your PC's components. As a general rule, all water

blocks produced by Aqua Computer can easily be disassembled to al-

low for cleaning after long use. No part is glued or soldered, therefore

replacement of individual parts is possible as well as for example chan-

ging mounting plates of a CPU water block when changing the type of

CPU in your system.

The high-quality rubber gaskets are long lasting. Should one ever wear

out, it can easily be replaced. Replacement parts can be obtained from

Aqua Computer. Generally the gaskets should be replaced after 5 years

or earlier if the cooler is frequently dismantled. The threaded hose-con-

nections of the plug&cool-system are made watertight with real rubber

gaskets. They can be replaced later the same way as the main gaskets

of the coolers. The optionally available barb connectors and 10/8 con-

nectors are also made watertight with a rubber gasket.

- 4 -

assembly of a water cooling system

assembly

of a water cooling system

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen