AAVIX AGT310 Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Detetor de metais AAVIX AGT310. AAVIX AGT310 17 páginas. 2x9v smart metal detector

be notched. The cursor above the selected target will

ﬂash. Press NOTCH again, the target name below the

cursor will disappear. It means this target will be notched

during the detection and the detector will have no

reaction to the notched target. If you want to pick up the

target notched, simply press NOTCH again. Press + or -,

the cursor will move from left and right. If NOTCH is not

pressed within about 3 seconds, the detector will enter

standby state.

Note:

1. It is not recommended to notch all targets listed on

the LCD. Because if you notch everything, you can't

ﬁnd anything.

2. If you want to select the setting of DISC or SENS

after pressing NOTCH, you have to wait for about 3

seconds until the cursor above the target goes out.

3. Press SENS then + or – to set the sensitivity. The default level

is of 6 bars.

Note: If you don't press the buttons (SENS,+,-) within

about 2 seconds, the detector will enter the standby state.

4. Place the detector on a wooden or plastic table, then

remove any watches, rings, or metal jewelry you are

wearing.

5. Adjust the search coil so the ﬂat part points towards the

ceiling.

Note: Never test the detector on a ﬂoor inside a building. Most

buildings have metal of some kind in the ﬂoor, which might

interfere with the objects you're testing or mask the signal

completely.