AAVIX AGT1320 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Cortador de relva AAVIX AGT1320. AAVIX AGT1320 13 páginas. 21” lawn mower

Cutting Height Adjustment

Adjusting the cutting height may bring you into

contact with the moving blade, causing serious injury.

• Stop the engine and wait for all the moving parts

to stop.

• Do not put your fingers under the housing when

adjusting the cutting height.

If the engine has been running, the muffler will be hot

and can severely burn you. Keep away from the hot

muffler.

Adjust the cutting height as desired. Set all four wheels

to the same height.

Note:

To raise the mower, move the cutting height

levers forward; to lower the mower, move them

towards the rear. (Figure 7)

Figure 7

1. Raise the Mower

Note:

5 position height adjustment. 1.75"-3.75"

Starting the Engine

1. Hold the blade control bar (Figure 8) against the

handle.

1. Hold blade control bar then pull the pull start to start

the mower. (Figure 9)

2. Lower the Mower

Note:

If the mower does not start after several attempts,

please contact your authorized service center.

Stopping the Engine

Service interval:

To stop the engine, release the blade control bar (Figure 10)

Important:

When you release the blade control bar, both

the engine and the blade should stop within 3 seconds. If

they do not stop properly, stop using your mower

immediately and contact an authorized service center.

Before each use or daily.