Aqua Control AQUATIC 2HP FUSION Series Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Fonte exterior Aqua Control AQUATIC 2HP FUSION Series. Aqua Control AQUATIC 2HP FUSION Series 14 páginas.
Imprimir página
A2
Parts Needed:
Nozzle base
x 1
Bolt
x1
1. Attatch Flare to Nozzle Base:
2. Install Flow Stoppers to the Nozzle Base:
Insert 12x Flow Stoppers into the bottom of
the Nozzle Base, secure with 12x screws
3. Attach the Nozzle Base
Stack 11 Washers in the cup
of the Outflow
Fusion Series:
DAFFODIL
.6 Nozzle Tip
x 1
Remove the Flare(which is shipped upside down),
flip it as shown and secure with 12 x screws
Secure the Nozzle Base to the
unit using the bolt that goes
through the center hole
Flow Stopper x12
Screw
1.25 OD Washer
x26
x11
1x Flare Attachment
(already installed)
Finally secure the
Center (.6)Nozzle Tip
to the Nozzle base
using 2x screws