Dexter Laundry 80LB CAPACITY COMPUTER CONTROL OPL WASHER T1200 Manual de instalação e operação - Página 16

Procurar online ou descarregar pdf Manual de instalação e operação para Máquina de lavar roupa Dexter Laundry 80LB CAPACITY COMPUTER CONTROL OPL WASHER T1200. Dexter Laundry 80LB CAPACITY COMPUTER CONTROL OPL WASHER T1200 18 páginas. 80lb capacity computer control opl washer

Imprimir página

The drive size setting has changed.

Washer controller internal error

The control cannot communicate with the drive Turn the power off to the washer. Check the data cable between the controller and the drive.

Over-current on the drive or motor.

Over-voltage on the drive or motor.

Overheating of the drive

Overload of the drive or motor

Ground Fault to the drive

Low Voltage to the drive

Internal drive error

Data error on communications between the

controller and drive

Note: Whenever power is turned off to the washer, it must remain off for one minute. The washer will not operate properly if this is not done.

Turn off the power to the washer. Check to ensure all the harnesses are properly connected

to the controller. Check to ensure the drive horsepower is proper for this size of washer. Turn

on power to the washer. (See Note) If problem reappears, contact your Dexter

representative.

Turn off the power to the washer. Wait one minute. Turn on the power to the washer. (See

Note) If problem reappears, contact your Dexter representative.

If no problem is observed, turn on power to the washer and test. (See Note) If problem

reappears, contact your Dexter representative.

Turn the power off to the washer. Check the washer motor to ensure it turns freely. Check

the wiring connections to the drive and motor. If no problem is observed, turn on power to the

washer and test. (See Note) If problem reappears, contact your Dexter representative.

Turn the power off to the washer. Check the washer motor to ensure it turns freely. Check

the wiring connections to the drive, braking resistors and motor. Measure incoming line

voltage. If no problem is observed, turn on power to the washer and test. (See Note) If

problem reappears, contact your Dexter representative.

Turn the power off to the washer. Allow the drive to cool. Check the cooling fins of the drive

to ensure proper airflow. Check the wiring to the drive including the fan wiring. If no problem

is observed, turn on power to the washer and test. (See Note) If problem reappears, contact

your Dexter representative.

Turn the power off to the washer. Check the washer motor to ensure it turns freely. Check

the wiring connections to the drive and motor. If no problem is observed, turn on power to the

washer and test. (See Note) If problem reappears, contact your Dexter representative.

Turn the power off to the washer. Check the wiring connections to the drive and motor. Check

the ground wiring of the drive, motor and incoming connection to ensure a proper ground is

present. If no problem is found, contact your Dexter representative.

Turn the power off to the washer. Check the wiring connections to the drive and motor. If no

problem is observed, turn on power to the washer and test. (See Note) Measure the incoming

line voltage. If problem reappears, contact your Dexter representative.

Turn the power off to the washer. Wait one minute. Turn the power on to the washer. (See

Note) If problem reappears, contact your Dexter representative.

Turn the power off to the washer. Check the data cable between the controller and the drive.

If no problem is observed, turn on power to the washer and test. (See Note) If problem

reappears, contact your Dexter representative.