Aqua Creek F-600TLNA Manual - Página 9

Procurar online ou descarregar pdf Manual para Sistemas de elevação Aqua Creek F-600TLNA. Aqua Creek F-600TLNA 14 páginas.

Imprimir página

Problem:

The lift won't move.

Solution:

1. Make sure the battery is properly seated:

You should hear a click when

the battery is properly seated

on the control box or charger.

2. Make sure the cords are properly plugged in:

NOT Properly Inserted:

The cord plug is ﬂ ush with

or sticking out of the outlet

3. Check the contact points:

Problem:

The lift stopped moving over the water and is stuck.

Solution:

1. Press the emergency button

Use a pen or pencil tip and

stick it into the emergency

button on the front of the

control box to retract the lift.

Note: the lift will not retract

if the battery is not fully

charged or if the control box

is not working. The emergency

button only overrides the

remote handset.

Basic Troubleshooting

POP!

Properly Inserted:

The cord plug is recessed

into the outlet

Make sure the contact points of

the control box and the battery

are not damaged or corroded.

If there is corrosion clean with

Scotch-Brite

pad. Put some

dielectric grease on the contact

points before reattaching the

battery.

Click!

NOT Properly Attached:

Note: the white bracket is

in front of the silver clip,

which will not allow for

an electrical connection

Check the ends of the cords for corrosion or

damage. The cord plugs should be recessed

into the outlet. You should feel them pop into

place when they are correctly inserted.

4. Make sure the battery is fully charged:

Properly Attached:

Note: the white bracket

is behind the silver clip,

holding it securely to

allow for an electrical

connection

The Charger is ON

when the green

light is glowing

The Battery is

CHARGING when the

orange light is glowing

When the Battery is

charged the orange

light will stop glowing

Revised 4/14/17