Aqua Creek F-702RLSDD Manual - Página 10

Procurar online ou descarregar pdf Manual para Sistemas de elevação Aqua Creek F-702RLSDD. Aqua Creek F-702RLSDD 16 páginas.

Pull-out Legrest Installation Instructions

3. Orient the pull-out legrest as shown in FIGURE 10 and slide the PLASTIC

GUIDE/SPACER into the chair support tube. Tap the PLASTIC GUIDE/

SPACER with a hammer or mallet until fl ush with the end of the support

tube. The threaded hole in the bottom of the PLASTIC GUIDE/SPACER should line-up with the hole drilled

in the chair support tube. Install the lock washer and 1/4 -20 x 1/2 inch cap screw from underneath and

tighten until snug.

PLASTIC GUIDE/SPACER

The PULL-OUT LEGREST is now ready to use. However, before using, slide the legrest in and out, and put the pad

up and down to make sure everything works smoothly.

LEGREST STOWED

1" SQ. TUBE

CHAIR SUPPORT TUBE

PULL-OUT LEGREST

PLASTIC GUIDE/SPACER

FLUSH WITH 2" SQ. TUBE

FIGURE 10

PULL LEGREST OUT

SLIDE FORWARD AND INSERT PIN TO LOCK IN "UP" POSITION

1/4" LOCK WASHER, SS

1/4-20 X 1/2" CAP SCREW, SS

FLIP LEGREST UP AND PIN

SLOT

You Will Need:

•

Flat head Screwdriver

•

Hammer / Mallet

•

5/32" Allen Wrench

Revised 9/19/17