Aqua Creek PORTABLE PRO POOL-AT LIFT Manual de instruções de instalação e funcionamento - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Sistemas de elevação Aqua Creek PORTABLE PRO POOL-AT LIFT. Aqua Creek PORTABLE PRO POOL-AT LIFT 20 páginas.
Imprimir páginaPORTABLE LIFT - ASSEMBLY INSTRUCTIONS
1. Begin by placing the parts from the previous page at or near to the desired
poolside location.
2. Stack 14 supplied round weight plates on the portable platform. To ensure proper
alignment stack 3 to 4 plates, check alignment by temporarily putting the cover
on, remove the cover and then stack 3 to 4 more plates. Repeat until all 14 weight
plates are on the platform and properly aligned.
3. Attach the weight stack cover assembly over the weight stack using the supplied
¼" NYLOCK NUTS and ¼" FLAT WASHERS. NOTE: Be sure to use silicone
to seal the flange before bolting together.
NOTE: Step 4 is applicable only for the Portable Kit (sold w/o lift).
4. Bolt the Pro Pool-AT Lift to the portable base plate using the supplied 1/2"x1-
1/2" countersunk flat head bolts, 1/2" flat washers and 1/2" nylon lock nuts.
4