Aqua Creek PRO SPA 60 Manual - Página 8

Procurar online ou descarregar pdf Manual para Sistemas de elevação Aqua Creek PRO SPA 60. Aqua Creek PRO SPA 60 17 páginas.

LIFT OPERATION:

Before operating the PRO SPA 60

familiar with the Handset Control and its functions. The figure to the left gives a quick

explanation of the four buttons and their function. For example, to move the lift UP, press the

top left button with the ▲ symbol and hold it down until the lift has reached its desired height

and then release the button. The other buttons work in a similar fashion. In all cases, releasing

the button will cause the lift to stop moving.

INSTALL 24V BATTERY & HANDSET

Locate the 24V Battery, the Battery Charging unit and the Handset

Control. Charge the battery for 24 hours (see page 11) then install it

on the bracket above the Control Box. Plug the Handset Control into

the Control Box as shown in the photos to the left. Press firmly to

make sure the plug is fully seated as shown below.

THE LIFT WILL NOT FUNCTION IF THE HANDSET PLUG IS

NOT FULLY SEATED OR IF THE BATTERY IS NOT

PROPERLY ALIGNED.

NOT SEATED

lift for the first time, the user or operator should become

SEATED



TO MOVE UP PRESS AND HOLD THE

▲ BUTTON. TO STOP MOVING UP

RELEASE THE BUTTON.



TO MOVE DOWN PRESS AND HOLD

THE ▼ BUTTON. TO STOP MOVING

DOWN RELEASE THE BUTTON.



TO MOVE LEFT PRESS AND HOLD

THE◄►BUTTON. TO STOP MOVING

LEFT RELEASE THE BUTTON.



TO MOVE RIGHT PRESS AND HOLD

THE►◄BUTTON. TO STOP MOVING

RIGHT RELEASE THE BUTTON.