Aqua Creek F-004PLB-23 Manual de instruções de instalação e funcionamento - Página 8

Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Equipamento de fitness Aqua Creek F-004PLB-23. Aqua Creek F-004PLB-23 17 páginas. Pro pool lifttm extended base

Imprimir página

PRO POOL LIFT OPERATING INSTRUCTIONS:

NOTE: CHECK ALL NUTS & BOLTS FOR TIGHTNESS AND FOR

WORN PARTS BEFORE EACH USE. NEVER OPERATE THE LIFT

WITH THE ARMRESTS FLIPPED UP.

The Pro Pool Lift

should always be in the full up or deck position before a user

attempts to transfer into the chair. Before attempting to transfer into the chair, check to

make sure the lift is operating by making a short test run: move the chair at least part way

in and out of the pool.

As you are standing in front of the chair, facing the chair, the armrest on either side will

flip up to allow for easier lateral transfers. Transfer into the chair and then lower the flip-

up armrest back into its normal position. Secure the adjustable lap belt around the waist

so that the belt is snug, but not uncomfortably tight.

You are now seated comfortably in the Pro Pool Lift

, and ready to move into the pool

or spa. Before you begin the operating cycle, take a visual check of the deck area and

pool area to make sure the operating path of the lift is clear.

It is not necessary to lower the lift all the way to t h e b o t t o m o f t h e l i f t ' s s t r o k e . Y ou may

stop the lift at any time in the downward cycle when it is comfortable for you to exit the

chair into the water.

This is NOT true however, when returning to the deck during the up cycle. The lift

should always be cycled completely to the up or deck position before attempting to exit

the chair on the deck.

To lower the lift into the pool, simply apply pressure on the down arrow button on the

remote control handset and the chair will start to move towards the pool. NOTE: for

safety reasons, it is necessary to maintain continuous pressure on the control button. If

you take your finger off of the control button the lift will stop.

When you are sufficiently submerged into the water to allow for an easy exit from the

chair, you may stop the lift cycle by releasing pressure on the down arrow button on the

remote control handset. Now release the lap belt by grasping the end of the belt that is

protruding above the lap belt and tugging gently. You may now flip up the footrest to

create more room in front of the chair for you to exit. Exit the chair by sliding straight

forward until you are clear of the seat and the footrest.

When you are ready to return to the lift seat and exit the pool or spa, make sure that the

chair is lowered (submerged) sufficiently to allow you to easily slide into the chair. You

should not a t t e m p t t o " l i f t " o r r a i s e y o u r s e l f i n t o t h e c h a i r . O n c e y o u a r e r e s e a t e d i n t o t h e

chair, you may lower the footrest to it normal operating position and place your feet on

the footrest. Next, re-secure the adjustable lap belt snugly around your waist. To raise the

chair out of the pool, simply press on the up arrow button on the remote control handset

and apply continuous pressure until the lift chair comes to a rest on the deck in the full up

position. You may now release the lap belt and exit the chair.