Aqua Creek Products F-VGRPL Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Sistemas de elevação Aqua Creek Products F-VGRPL. Aqua Creek Products F-VGRPL 14 páginas. Portable lift

Imprimir página

Mighty Voyager Assembly Instructions

NOTE:

Assembly will require eighteen (18) 50lb bags (900lbs) of sand, not supplied with the lift.

DO NOT USE LIFT WITHOUT SAND AS A COUNTERWEIGHT! DO NOT USE ANY MATERIAL OTHER

THAN SAND AS A COUNTERWEIGHT!

1. Remove the lift from the packaging. Slide the chair and chair cradle through the bottom

of the head casing and attach using the supplied snap pin. Slide the footrest assembly into

the chair tube and attach using the supplied knob screw (be sure the plastic insert is fully

installed in the chair tube and that the hole in the insert and in the bottom of the chair tube

are aligned). See FIGURE 2 below.

2. Remove the ballast lid and fi ll the ballast tank with 900 pounds of all-purpose sand (the sand

should come to the bottom of the lip where the ballast tank lid sits, see picture below). Once

all the sand has been poured in, screw the lid back in place on top of the tank.

CHAIR & CHAIR CRADLE

FOOTREST ASSEMBLY

SNAP PIN

BALLAST

TANK LID

FIGURE 2

BALLAST

TANK

Revised 10/21/20