AVM EVOLUTION CD 5.2 Manual de Instruções - Página 8
Procurar online ou descarregar pdf Manual de Instruções para Leitor de CD AVM EVOLUTION CD 5.2. AVM EVOLUTION CD 5.2 14 páginas.
Também para AVM EVOLUTION CD 5.2: Manual de Instruções (14 páginas)
Imprimir página2.3.2 Display in D/A converter mode
On the left-hand side the name of the currently selected input is displayed (SOURCE). If there is no
incoming signal available at the currently selected input, "NO SIGNAL" is displayed right next to the
input name.
2.4 CD player
2.4.1 Playable disc formats
Your CD player can play back all compact discs which are recorded according to the red book
standard (means the standards for audio CDs established by Philips and Sony). Furthermore all CDRs
and CDR/Ws with good reflection recorded according to this standard are playable. Most copy-
protected discs are also playable. But we cannot take responsibility that all future copy protection
systems are playable.
2.4.2 Insert / eject a CD
Insert a CD
Your CD player is provided with a slot-in CD drive (9). Insert the CD (coverside up) and push slightly.
The drive will now automatically draw the disc inside. Now the unit will read the TOC (Table Of
Content) of the inserted disc
Now the CD player reads the content of CD and shows it on the display (8). Most left is the number of
the actual track followed by the total number of tracks on the CD (for example "1/17"). The middle f the
display shows the total playing time of the CD.
NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the inserted disc
is not readable (DVD, data-CD) the display will show "no playable disc".
Eject CD
Press the EJECT button (15). The disc will be ejected.
AUTO-CD function
If CD is not selected as source the unit will automatically change to CD from any other input after you
have inserted a CD.
2.4.3 CD playback
If a disc is inside playing is started by pressing the PLAY button (12). If you press PAUSE (11) the unit
will go into the pause mode until PLAY (12) or STOP (10) is pressed.
Using the skip buttons (13, 14) you can easily access any title on the disc. When you press one of the
skip buttons for longer than a second while the unit is playing, it begins to play in fast forward or
reverse mode.
The actual state (PLAY, PAUSE, STOP) is shown in the display (8). Furthermore the display shows the
actual playing time, the actual title number and the total number of titles.
2.4.4 Repeat
Press the repeat button (6) once to repeat the actual title, twice to repeat the whole CD or the
programmed sequence. A third pressing returns to the normal playing mode. The repeat state is
displayed in the upper line of the display (8).
8